Maxx Model CNC Aluminum Double O-Ring Air Seal Nozzle for Airsoft AEG Series (Length: 19.50mm)

"This nozzle fixed my fps issue. After spending countless hours changing springs and troubleshooting a fps drop issue after upgrading everything in the gun this nozzle fixed it right away. With an aim top matrix o-ring nozzle the gun was shooting at 280-290fps dropping this nozzle in brought it up to 345-350fps.

"I got the 19.50 for my VFC Avalon MP5, it has dual sector, and 160 sping, before the change it was 290 fps with .25 bbs, when I chaged the nozzle the fps went up to 360 fps. Totally worth it.

"Probably one of the best nozzles on the market. I used the 21.50mm in all my M14s (M14, M14 EBR, Socom-16) with great results. Stock m14 air nozzles are trash and with these it brought my fps back to 365fps when before with the stock nozzle they were a mere 300fps.

I use these in all builds. 10/10

"Purchased to remedy a custom M4 build that was giving me serious problems. Mated to a Maxx hop up unit and custom built Retro Arms gearbox; this solved all my compression and consistency issues. With a G&P M4 receiver I decided upon a 21mm nozzle length after doing some reading/research and this is the right length. Perfect nozzle seal resulting very high and consistent compression. Shots are very accurate and FPS is or - 2fps. Very pleased.

"Use a 21.00 in an ics without issue and this 20.75 in my TM P90 and works great with the prowin chamber and lonex compression parts.

"Use this in my ICS CXP15. Fits fine and works well with a MAXX chamber on a Lonex cylinder head. No compression issues and have experienced no signs of wearing.

"these work great paired with the Maxx cylinder head. the O rings are very fragile when installing for the first time so getting some extra ones is advisable as even with a lot of lube and care i split the o rings this came with on installation

"19.50 Fits perfectly in the LCT RPD. Much better than the stock one.

"21.55mm is the length of the stock CYMA Platinum nozzle, i replaced it with a Maxx model 21.5mm nozzle and I was getting feeding issues and jams. I just now replaced the hop up with a Maxx Model CNC Aluminum hopup and now learned it requires a 21.25mm nozzle!

Hopefully it fixes my feeding issues.

"21.5 perfect drop in replacement for my cyma platinum with no issues

"Got this for my MK46, 21.5mm works beautifully when paired with the Maxx ball bearing piston head, cylinder head and a bullgear hopup. Saw a significant increase in joules, from 1.1 to 2.1. It's amazing what a good air seal will give you. Now to get a different spring to make it an appropriate joule rating lol.

"Perfect feeding and air seal! The 22.50 fit my echo1 FAL perfectly, should work with JG, CA and 6mm pro shop FAL’s also.

"20.75 fits perfectly in a kwa VM4.

"38.50mm fits great in my VFC SCAR-H AEG. OUTSTANDING air seal

"Two tapper plates I have found work best with this nozzle are one sold by SHS and the other is BOLT. They do not need modifications to fit this nozzle.